Starrett FCH0234 70mm Holesaw

Starrett Holesaws

The Fast Cut saw combines a new tooth material, with enhanced heat and wear resistance, and a new tooth design, providing a smoother, faster cut on a wide range of materials, when compared against the previous Constant Pitch saw.

Specifically suited to cutting stainless and mild steel sheet, the Fast Cut will also cut through tubes with a wall thickness of up to 3mm (1/8).

New tooth material for enhanced heat and wear resistance and greater product life

Ideal for stainless and mild steel sheet and tubes with wall thickness of up to 3mm (1/8)

New 5.5 TPI / 25mm tooth form provides a smoother, faster cut in all materials

41mm (1.5/8″) hole saw depth

The Deep Cut saw combines the tried and tested tooth form from the previous Dual Pitch product, with a new tooth material for enhanced heat and wear resistance.

The Deep Cut saw also features an increased hole saw depth of 51mm (2), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2) thick.

Aggressive material penetration and kerf clearance

Ideal for solid materials or tubes of a wall thickness greater than 3mm

51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube

New tooth material for enhanced heat and wear resistance and greater product life

51mm (2) hole saw depth requires arbors with an extended length pilot drill (e.g. A1E, A2E or A17-38E etc)