sml Dynamic NFC/RFID Tag Board

The SPX-18991 NFC/RFID Tag is a Dynamic NFC/RFID Tag for sml boards. The STMicroelectronics ST25FV64KC is a dynamic Near Frequency Communication / Radio Frequency Identification tag IC with 64Kbit (8KByte) of on-board EEPROM memory. It has an I2C interface which the sml processor board can use to read and write to the EEPROM memory. The NFC/RFID tag peripheral board would also let you configure your sml logging system.
ST25DV64KC Features:

Contactless interface

Based on ISO/IEC 15693
NFC Forum Type 5 tag certified by the NFC Forum
Supports all ISO/IEC 15693 modulations, coding, sub-carrier modes and data rates
Custom fast read access up to 53 kbit/s
Single and multiple blocks read (same for Extended commands)
Single and multiple blocks write (up to four) (same for Extended commands)

Memory

64-Kbit of EEPROM
I2C interface accesses bytes
RF interface accesses blocks of 4 bytes
Write time:
From I2C: typical 5 ms for 1 up to 16 bytes
From RF: typical 5 ms for 1 block
Data retention: 40 years

Data protection

User memory: one to four configurable areas, protectable in read and/or write by three 64-bit passwords in RF and one 64bit password in I2C

System configuration: protected in write by a 64-bit password in RF and a 64-bit password in I2C

sml Specifics:

Interface: I2C

I2C Addresses:

User Memory: 0x53

System Memory: 0x57

RF Switch Off: 0x51

RF Switch On: 0x55

Properties:

Length: 1.60″ (40.6mm)

Width: 0.42″ (10.7mm)

Height: 0.27″ (6.8mm) max.

Weight: 1.9g (0.07oz)

PCB thickness: 0.8mm

Resources

Schematic

Eagle Files

Dimensions

Datasheet(ST25FV64KC)

Application Note(ST25FV64KC)

GitHub Hardware Repo

Antenna Datasheet(W3102)

Arduino Library

Library Documentation

sml Hookup Guide