Gravity: DS18B20 Waterproof Temperature Sensor Kit

Resources:Waterproof DS18B20 Digital temperature sensorTerminal sensor adapterDigital sensor cable
Waterproof DS18B20 Digital Temperature Sensor Kit With 1 Wire Interface For Arduino And IoT Projects
The Gravity DS18B20 Waterproof Temperature Sensor Kit is a reliable and easy-to-use temperature measurement solution designed for Arduino, ESP32, Raspberry Pi, and other microcontroller platforms. The kit includes a waterproof DS18B20 digital temperature probe and a dedicated resistor module with a pluggable terminal adapter, enabling quick installation without soldering. Its waterproof construction makes it suitable for liquid temperature monitoring, environmental sensing, and outdoor applications where conventional sensors may not perform reliably.
Based on the DS18B20 digital temperature sensor, the module provides configurable 9-bit to 12-bit temperature readings through a simple 1-Wire communication interface. Only one data line and ground connection are required, significantly simplifying wiring and allowing multiple sensors to operate on the same communication bus. Supporting operating voltages from 3.0V to 5.5V, the sensor is compatible with a wide range of development boards and embedded systems. It is an excellent choice for water quality monitoring, smart agriculture, aquaculture, environmental monitoring, and IoT-based temperature measurement projects.
Key Features

DS18B20 Digital Temperature Sensor: Accurate digital temperature measurement.
Waterproof Probe Design: Suitable for liquid and outdoor temperature monitoring.
1-Wire Communication Interface: Requires only one data line for communication.
Configurable Resolution: Supports 9-bit to 12-bit temperature readings.
Wide Operating Voltage: Compatible with 3.0V to 5.5V systems.
Arduino Compatible: Easy integration with Arduino development boards.
Solder-Free Installation: Includes pluggable terminal adapter.
Gravity Ecosystem Compatible: Simple connection with Gravity expansion boards.
Supports Multiple Sensors: Multiple DS18B20 sensors can share one bus.
Reliable Digital Output: Minimizes signal degradation and noise.
Compact And Easy To Install: Suitable for embedded applications.
Designed for Long-Term Monitoring: Ideal for continuous temperature measurement.

Applications

Water temperature monitoring
Water purifier systems
Aquaculture monitoring
Smart agriculture
Environmental monitoring
Weather stations
Industrial temperature sensing
IoT monitoring systems
Liquid temperature measurement
Laboratory equipment
Home automation projects
Data logging systems

Specifications

Operating voltage: 3.0~ 5.5V

+-0.5C Accuracy from -10C to +85C

Usable temperature range: -55 to 125C (-67F to +257F)

9 to 12-bit selectable resolution

Uses 1-Wire interface- requires only one digital pin for communication

Unique 64-bit ID burned into the chip

Multiple sensors can share one pin

Temperature-limit alarm system

Query time is less than 750ms

3-wire interface:

Type A

Red wire – VCC
Black wire – GND
Yellow wire – DATA

Type B

Red wire – VCC
Yellow wire – GND
Green wire – DATA

Stainless steel tube 6mm diameter by 35mm(1.34″) long

Cable diameter: 4mm(0.16″)

Length: 90cm(35.43″)

Package Contents

Waterproof DS18B20 Digital temperature sensor(DFR0198) x1

Terminal sensor adapter(DFR0055) x1

Digital sensor cable(FIT0011)