Adafruit TMP117 0.1C Accuracy I2C Temperature Sensor – STEMMA QT / Qwiic

The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. In addition to the obvious support for reading the temperature, the TMP117 can also monitor the temperature and alert you when corrective action needs to be taken.
The TMP117 is a high-precision digital temperature sensor. It is designed to meet ASTM E1112 and ISO80601 requirements for electronic patient thermometers. The TMP117 provides a 16-bit temperature result with a resolution of 0.0078C and an accuracy of up to +-0.1C across the temperature range of -20C to 50C with no calibration. The TMP117 has in interface that is I2C- and SMBus- compatible, programmable alert functionality, and the device can support up to four devices on a single bus. Integrated EEPROM is included for device programming with an additional 48-bits memory available for general use.
Key Features

TMP117 high-accuracy temperature sensor
+-0.1C (maximum) from 20C to +50C
+-0.15C (maximum) from 40C to +70C
+-0.2C (maximum) from 40C to +100C
+-0.25C (maximum) from 55C to +125C
+-0.3C (maximum) from 55C to +150C
Operating temperature range: 55C to +150C
16-bit resolution: 0.0078C (1 LSB)
Programmable temperature alert limits
Selectable averaging
Digital offset for system correction
General-purpose EEPROM: 48 bits
NIST traceability

STEMMA QT / Qwiic 4-pin 1mm Pitch White Female Connector Cable 150mm Long – Both Sidecan be purchased seperately.
Resources

TMP117 Datasheet

EagleCAD files on GitHub

Fritzing object in the Adafruit Fritzing Library

Primary Guide: Adafruit TMP117 High Accuracy I2C Temperature Monitor